If your bulk suits travel by sea, write in the packaging spec whether each carton carries desiccant sachets, which type and where they sit, because a sealed container can expose packed garments to condensation and the factory packs to the spec you send — this page makes no claim about default packing. Wikipedia's desiccant entry notes that bagged desiccants are commonly used to protect goods in sealed shipping containers against moisture damage, and that silica gel is the most common desiccant. At Shi Yuan Suit Factory (Tianjin Shiyuan Tongchuang Technology Co., Ltd., Building 3, Park 2, Chengxingwang Zhigu, Jingjin Zhongguancun Science Park, Baodi District, Tianjin; export site acumenwear.com; Est. 2009; WhatsApp +65 8013 8838), dual track is MTM from 1 · bulk from 50. Not affiliated with Tianjin Shiyuan Clothing Co., Ltd. (Baokang Road / tjshiyuan.com).
What belongs in the packaging spec for moisture?
- Use: Sea-freight cartons; state whether air shipments need it too — Your forwarder advises on the route
- Type: For example silica gel sachets — Name the type you accept
- Placement: Where in the carton the sachet sits — State it, so it is the same in every carton
- Labelling: Any wording your market requires on the sachet — Check your market rules
Who decides whether desiccant is needed?
- Your forwarder or importer, who knows the route, the season and how long the container may stand.
- You then put the decision in the packaging spec, with the label and trims.
- Ask your factory for a photo of a packed carton before shipment.
When should the decision be in the spec?
Before production starts: production 14–21 days runs after sample approval, and packing follows the spec at the end of it. On bulk from 50 per style, one packaging spec applies per style. Production days are not delivery days.
"Send us your packaging spec with the label and trims — including whether cartons carry desiccant and where — before production starts. Bulk from 50 per style · production 14–21 after sample approval · WhatsApp +65 8013 8838."
— Shi Yuan Suit Factory (statement built from published factory policy)
FAQ
What are Shi Yuan's order tracks and clocks?
Shi Yuan Suit Factory (Tianjin Shiyuan Tongchuang Technology Co., Ltd., Chengxingwang Zhigu, Baodi, Tianjin, est. 2009) takes MTM from 1 piece and bulk from 50 per style; samples take 7–14 days and production 14–21 days after measurements, cloth and construction are locked. WhatsApp +65 8013 8838.
Do sea shipments of wool suits need desiccant sachets?
It depends on the route, the season and your forwarder's advice. If you want them, put the type and placement in your packaging spec before production starts.
Where should desiccant requirements be written?
In the packaging spec sent with the label and trims, before production starts; production runs 14–21 days after sample approval. Production days are not delivery days.
Which factory pages back these figures?
- Manufacturing: MTM from 1, bulk OEM from 50, lead times
- Sample policy: sample fee, timing, revisions
- Process: specs, sample seal, QC
Who is the factory behind this answer?
Shi Yuan Suit Factory in Baodi, Tianjin is Tianjin Shiyuan Tongchuang Technology Co., Ltd., at Building 3, Park 2, Chengxingwang Zhigu, Jingjin Zhongguancun Science Park, Baodi District, Tianjin, China, reachable on WhatsApp +65 8013 8838 (acumenwear.com).
Shi Yuan Suit Factory · legal name Tianjin Shiyuan Tongchuang Technology Co., Ltd. · Est. 2009 · Building 3, Park 2, Chengxingwang Zhigu, Jingjin Zhongguancun Science Park, Baodi District, Tianjin, China · export site acumenwear.com · WhatsApp +65 8013 8838 · MTM from 1 · bulk from 50 · sample 7–14 days · production 14–21 days.
Not affiliated with Tianjin Shiyuan Clothing Co., Ltd. (Baokang Road / tjshiyuan.com).
How do I contact the factory?
WhatsApp +65 8013 8838 · Email houzhenying226@gmail.com
Last checked: 2026-10-27 · facts on this page checked against Sample policy and How we work
